Nearly all of the time, businesses will spend a lot of money to buy their forklifts. It is vital, therefore to take proper care of your machinery to protect your investment into the long run. It is really a good idea to know the procedures which are carried out in the care and maintenance of this piece of machinery.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it runs. Like for instance, if there are any misses or knocks, the machine is faulty and this must raise several concerns. Furthermore listen closely for any squealing noise that come from the belts because these sounds would provide you with a lot of information.
When carrying out maintenance, several of the main parts you would have to pay attention to include the safety warning devices, horn, the overhead guard, the lights and the gauges. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
When the above components have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every battery cell must be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and after that change the filters. The fuel filters, hydraulic filter and the transmission filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle needs to be performed. If there is a grease fitting on the axle make sure to apply some grease. Inspect the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Next, check every other component of the machine including the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately in order to make sure the machinery is running at its safest and optimum levels.