Multi Directional Forklift Yukon

Used Side Loader Forklift Yukon - Side loader forklifts are ideal for lifting long and heavy materials in narrow locations such as warehouse aisles, loading docks, lumber yards, etc. These forklifts are given their name by the way in which they load, and unload, material - from the side of the forklift rather than from the front, as with standard forklifts. Benefits of Side Loader Forklifts v Standard Forklifts Forklifts that rely on the original counterbalance system can become unstable when moving long or heavy loads. However, the side loader forklift is specially designed to handle these types of loads, such as long pipes and raw timber, providing much more stability. Having the load face the direction of travel ensures that timber and steel can be easier to maneuver. Side loaders gift the operator with an unobstructed view. This is often compromised on standard forklifts with the tines or front-carrying load design. Side loaders can access narrow aisles and tinier doorways with ease since loads are transported down the side of the machine instead of on the front as with a standard forklift. The load may have to be raised on regular forklifts to travel around obstacles that increase the chances of tipping over. A side loader forklift makes much of that maneuvering unnecessary. Operating in narrow warehouse locations is much safer and more accurate with side loaders. Most side loaders are able to lift up to 12,000 pounds and can travel at speeds just above 5 miles per hour but are often equipped with the ability to program travel speeds. This feature allows the operator to match speed to a specific application. Types of Side Loader Forklifts Class 2 - Electric Motor Narrow Aisle Trucks Side loader forklifts are within the Class 2 Electric Motor Narrow Aisle Trucks. This class captures the forklifts that operate in narrow aisles with electrically sourced power. The side loader is useful for handling long and narrow loads in similar locations including lumber, carpet and laminate. These machines are used for feeding machine tools and rack storage. The narrow aisle units are popular in warehouses as they offer a sleek design that saves on storage. These units are efficient at loading and unloading. These Class 2 side loader forklifts are designed to minimize the area taken up by the forklift truck. This allows increased efficiency and speed when moving, loading and unloading in narrow aisles. Electric power reduces harmful emissions and allows these machines to be used mainly inside. Internal Combustion Engine Side Loader Forklifts The Class 2 forklifts only apply to side loaders that use electric power. Units that do not rely on electricity do not fall into this category. Side loaders are common at steel and pipe yards and lumber and timber yards. They accurately transport loads from storage areas including racking, flatbeds, and stacking loads in blocks. Side loaders used in these contexts must be able to work outdoors, often in varying temperatures and over uneven surfaces. This means an internal combustion engine and, sometimes, pneumatic tires are a better option for the job. Side loaders are great for these work environments as they are built to handle the length of items and the weight. Picking items up in the middle is vital for loading and unloading long materials safely and efficiently. Side Loader Forklift Design The side loader forklift comes in two basic designs: 1. Stand on; and 2. Sit down. Stand On Side Loader Forklifts Used mostly indoors in applications such as warehouses, the stand on end control has a small platform area surrounded by the forklift’s controls, usually located in the middle of the truck, for the operator to stand. The stand on unit has many advantages. The stand on side loader does not require a seat for the operator which allows for a smaller cab design. This means the forklift has a smaller footprint which is an advantage when maneuvering around tight, high-traffic areas. The operator also has increased visibility when operating in a standing position, especially when operating the forklift in reverse. In the stand up position, an operator can turn his whole body to view the rear of the truck when reversing direction whereas in a sit down position the operator must twist his back and neck to get a clear view behind. There are more safety and operator comfort in the stand-up side loaders, ensuring better visibility and less potential for damage or injury. Operators can get onto and off of the stand up forklift faster compared to a sit-down model and this may increase efficiency in certain situations. Sit Down Side Loader Forklifts Of the two basic designs, the sit down side loader forklift is the most popular. Similar to the side loader stand, the sit-down unit features a centrally located cab. The sit-down models have a raised platform and a seat that is opposite to the controls. Operator comfort is one of the main advantages of the sit-down side loader. The machine enhances productivity and reduces fatigue when operators can work from a resting position. Customizable Features The side loader has customizable bed length options to be suitable for many jobs. Popular for heavy and bulky items, the standard side loader has been designed to fit heavy and bulky loads. A sixty-inch extension upwards may be utilized for special jobs. Side loaders need to consider aisle widths and guide rails prior to customization. One popular feature for these forklifts is multidirectional capability. These side loaders have crab steering which allows two wheels to operate independently from the others. Crab steering allows the unit to travel in all four directions by changing the direction of the wheels. The side loader can fit into close quarters and narrow spaces without needing to make huge turns or adjustments. The smaller turning radius helps to avoid damage to items and the building while increasing safety. More efficiency is attained since there are less space and time needed to move around the job site. It is possible to customize a variety of side loader forklift features for specific jobs. Lift mast heights, lights, mirrors, lift capacities and tine length and other features are all customizable. Certain features are also adjustable, allowing for further customization of the side loader for the particular job application. Travel speed, acceleration time, load limits and breaking force can all be set allowing further job efficiency and increased workplace safety. For all of the above reason, the side loader forklift has become the most popular option for workplaces where space is limited and long loads are involved. Multi Directional Forklift PDF